Product Details:
|
Typical Application: | Corrosive/Conductive Liquids, Viscous Liquids | Antenna Material: | Insulated Rigid Rod PTFE(optional) |
---|---|---|---|
Power Supply: | 24VDC | Medium Temperature: | -40~+260℃ |
Process Pressure: | -0.1~4.0MPa | Procedure Linkage: | 3/4 BSPT Thread,flange(optional) |
Levels Of Protection: | IP67 | Explosion-proof Classification: | ExiaIICT6(optional) |
High Light: | Viscous Material RF Admittance Level Transmitter,NYSP RF Level Transmitter |
NYSP High Stability RF Admittance Level Transmitter For Viscous Material
The working Principle of NYSP High Stability RF Admittance Level Transmitter For Viscous Material
Radio frequency admittance level meter is a continuous level measurement product based on radio frequency admittance principle. This product has the advantages of high stability, high sensitivity and wide application. Compared with the traditional capacitive level meter, the modular design can help set the instrument simply and conveniently. Once the setting is completed, it can be used normally and free of maintenance for life. It enables users to intuitively understand the operation of the equipment and deal with the problems in time. It is also safe and reliable in complex industrial occasions.
Design features of NYSP High Stability RF Admittance Level Transmitter For Viscous Material
◎ anti hanging: the unique driving shield circuit design improves the anti hanging ability
◎ power supply range: power supply working range: 13 ~ 35vdc
◎ probe process temperature: - 100 ℃ ~ 800 ℃
◎No dead zone measurement, can be applied to a large range of material level measurement occasions of more than ten centimeters or even several centimeters
◎The maximum measuring range can reach hundred meters, even hundreds of meters
◎Viscous material interface measurement is a great advantage of this instrument
◎stable and reliable output, resistant to fly ash, falling material, water vapor, crystallization and wax
◎no movement, no parts easy to wear, no regular cleaning, maintenance and debugging
Technical parameters of NYSP High Stability RF Admittance Level Transmitter For Viscous Material
Typical application | Liquid(Corrosion, conductivity, low dielectric constant, stirring, interface, electric dehydration, viscosity, deep well, ultra large range and other occasions) |
Dust (conductivity, insulating powder, etc.) | |
Solid (conductivity, insulating, ultra-high temperature insulating solid, etc.) | |
product model
|
NYSP-M16 NYSP-M17 NYSP-M18 NYSP-M19 NYSP-M20 NYSP-M21 NYSP-M22 NYSP-M23 NYSP-M24 |
Antenna form
|
Soft cable, insulated soft cable, non insulated soft cable, hard rod, insulated hard rod, insulated hard rod at both ends, cylindrical hard rod |
Antenna Material | PTFE,304,316 |
measuring range | 3m, 20m(Deep well can measure hundreds of meters and can be customized) |
Wavelength | 635-650mm |
Measurement precision | 0.05%~0.1%F.S |
Power supply | 24VDC |
signal output |
4...20mA/HART/ RS485/Modbus…. |
Process temperature | -40~+130℃,-100~+200℃, -40~+260℃, -50~+500℃ |
Process pressure |
-0.1~1.6MPa,-0.1~4.0MPa, -0.1~6.3MPa |
Process connection | screw thread,flange(selectable) |
Electrical interface | M20*1.5,½ ″NPT |
levels of protection | IP65,IP67,IP68(selectable) |
Explosion-proof grade | Exia II CT6 Ga,Exd II CT6 Gb(See certificate for details) |
※Note:The product can be customized according to the specific requirements of users.
Contact Person: Anna Zhang
Tel: 15021679084